Canon Pixma iX6770 Install

First Time Setting Up Canon Pixma iX6770 Install

First Time Setting Up Canon Pixma iX6770 Install

First and foremost, carefully unbox your Canon Pixma iX6770 printer and take away all the packaging material. Next, you ought to install the ink cartridges and cargo paper in its paper tray.
Then, place the printer at a secure place within the signal range of your router.
Now, hook it up to a “Power Source”. Then, press its “Power” button to show it on. Here, you want to make sure that its white “Power Lamp” is correctly lit and stable.
Next, you ought to activate your computer and connect it to an equivalent internet network with which you would like to attach your printer.
Thereafter, insert the “Installation CD” and click on “Run” when prompted by a pop-up box. However, just in case if it doesn't autorun. Then, remove the CD and reinsert it into the pc . Thereafter, access your computer’s CD- Drive from ”My Computer”. then , double-click the Setup File to open it.
As a result, you'll get the primary page of the “Printer Setup” window. Here, you ought to click on “Next” to proceed with the Canon Pixma iX6770 Setup process.
The following window will prompt you for “Connection Method Selection”. Hence, click on “Network Connection”.
Thereafter, click on “Wireless Connection” on subsequent window of “Connection Method Selection”.
The next window will prompt you to make sure that your Canon Pixma iX6770 printer is turned on. For this, you want to check the white “Power Lamp”. It must be lit and stable. However, just in case if the printer not turned on. Then, press its “Power” button to show it on.
Then. click “Next”.
Subsequently, you'll get the “Printer Setup” window. Here, you ought to click on “Connect To The Network” button.
The subsequent window will prompt you for “Setup Procedure Selection”. Here, it gives you two alternative methods, namely, “WPS” and “Cableless Setup”. The “WPS” method works only just in case if your “network access point” or “router” supports “WPS”. On the opposite hand, “Cableless Setup” method works for all the quality routers. Another key point to recollect is that “Cableless Setup” method takes longer that the “WPS” option. Besides, it'll temporarily disable the web connection. Additionally, it's not available for systems with Windows XP OS.
The following window will guide you with the procedure for “Cableless Setup” connection. Hence, approach your Canon Pixma iX6770. Then, press and hold its “WiFi” button until the “Power Lamp” flashes 2 times. Thereafter, release the “WiFi” button.
Now, click “Next” on the Installation Wizard if you perform the last step accurately. On the opposite hand, click on “Start Again” if you would like to undertake the last step again.
As a result, the blue “WiFi Lamp” will start flashing quickly, while the “Power Lamp” stays lit and stable. Once you've got ensured an equivalent , click on “Next”.
Thereafter, it'll process the setup and disable the web connection temporarily. Hence, await an equivalent .
The next window will prompt you to “Select your home of Residence”. Therefore, make an appropriate choice from the available alternatives. Thereafter, click on “Next”.
Now, select your “Country” on the subsequent “Select your home of Residence” window. Then, click “Next”.
Next, it'll provide you with an inventory of all the software available for installation. Hence, make an appropriate choice. However, just in case of any confusion, click on “Select All”. As you create your selection, it'll display the specified “disk space”. Hence, check an equivalent and make sure that your “Hard Disk” has sufficient free space.
Thereafter, click “Next”.
As a result, subsequent window will provide you with the “License Agreement”. Therefore, closely review the knowledge . Then, click on “Yes” to simply accept the terms.
Now, click “Next” on the subsequent Firewall Settings window.
Consequently, your network will detect the Canon Pixma iX6770 printer and hook up with it. However, just in case if it fails to detect the printer. Then, subsequent window will prompt you to “Check Printer Settings”. Hence, click on “Redetect” to determine the connection. At times, it's going to require you to repeat this process multiple times thanks to your network configurations. However, if it still fails to attach . Then, print out the “Network Settings” of the printer. For this, press and hold the “Resume/Cancel” button on the printer until its “Power Lamp” flashes for six times. Then, check the printout. It should display the right Network Name and IP Address. this may confirm that the printer is correctly connected to the right network. On the contrary, if this test fails. Then start the setup process again.
Finally, you'll get the “Setup Completion” window. Here, you'll find your printer’s “Model Number” and “Network’s SSID (Name)”. Hence, make sure that both the small print are correct. Then, click on “Complete”.
Now, click “Next” on the “Print Head Alignment Recommended” window.
Subsequently, click “Next” on the “Setup Complete” window.
Next, it'll prompt you for “User Registration”. Hence, if you would like to register now. Then, click “Next” and follow on-screen instructions to finish the registration process. Else, click on “Cancel” to register later.
The next window will prompt you to hitch the “Extended Survey Program”. Hence, read the small print carefully. Then, click “Agree” or “Disagree” as per your choice.
At last, click “Exit” to shut the Canon Pixma iX6770 Setup Wizard.
Standard Setup for Mac
First of all, unbox your Canon Pixma iX6770 printer and prepare it for the setup.
Then, hook it up to a “Power Source” and switch it on. make sure that its white “Power Lamp” is correctly lit and stable.
Now, activate your computer and connect it to your home network.
Next, you ought to insert the Installation CD and click on “Run” when prompted by a pop-up box.
As a result, it'll open the Canon Pixma iX6770 Setup Installer. Hence, click “Next” on the initial window.
Now, it'll prompt you to supply your “Mac Administrator User ID and Password”. Hence, enter the small print correctly.
Once again, click “Next” on the subsequent window.
Next, you ought to select “Network Connection” on the subsequent window.
Thereafter, select “Wireless Connection”.
Subsequently, make sure that your Canon Pixma iX6770 printer is turned on. Then, click “Next”.
Now, click on “Open” on the subsequent pop-up box.
Now, click on “Connect To The Network”.
Subsequently, click on “Cableless Setup”.
After that, enable “Cableless Setup” on your printer by following the on-screen instructions.
When it prompts to hunt your permission for the setup, click “Allow” to allow .
The next window prompts you to pick “Your Region”. Hence, make an appropriate choice and clilck “Next”.
Thereafter, select your “Country Of Residence” on the subsequent window. Then, click “Next”.
After that, select the software to put in from the list of obtainable applications. However, just in case of any confusion, you ought to “Select All”. Then, click “Next”.
The following window displays the “License Agreement”. Hence, read the small print carefully. Then, click “Yes”.
As a result, it'll download and install the software.
Thereafter, click on “Add Printer” on subsequent window.
Now, select the “Canon IJ Network” version of your printer. Then, click “Add”.
As such, await the installation process to finish .
Once again, click “Next” on the subsequent window.
Next, you ought to click “Next” on the “Print Head Alignment Recommended” window.
Subsequently, click “Next” on the “Setup Complete” window.
Next, it'll prompt you for “User Registration”. Hence, if you would like to register now. Then, click “Next” and follow on-screen instructions to finish the registration process. Else, click on “Cancel” to register later.
The next window will prompt you to hitch the “Extended Survey Program”. Hence, read the small print carefully. Then, click “Agree” or “Disagree” as per your choice.
At last, click “Exit” to shut the Canon Pixma iX6770 Setup Wizard.

pixma-ix6770-300x265
ezgif.com-crop
issue
Call Now
Scroll to Top