Canon Pixma G3000 Install

First Time Setting Up Canon Pixma G3000 Install

Connecting Printer To The Wireless Network

•First of all, complete the hardware setup of your printer. you furthermore may need to load the paper and ink within the printer.
•Once you're through with the hardware setup of the printer, press the facility button from the operational panel of the printer.
•After that, you've got to press and hold the WiFi button until the lamp light flashes on the printer. you'll find this WiFi button and lamplight on the operational panel.
•Now, press the colour button followed by the WiFi button.
•Make sure lamp light will flash quickly and therefore the power lamp is lit.
•Thereafter, you'll confirm the printer connection to the wireless network.

For connection, a minimum of 2 A-4 papers must be loaded within the paper tray.

•Then, you've got to press and hold the WiFi button until the facility lamp light blinks once.
•Further, again press the WiFi button.
•Subsequently, it'll print the network information page.
•In the network information printout, you've got to see the Connection.

The connection must indicate “Active” along side the right wireless connection name by SSID service.

•This will successfully complete the printer configuration procedure. you'll now proceed to the download and installation of the printer driver.

Download and Install Printer Driver

•Firstly, access an internet browser on your device.
•After that, go the Canon Setup website by typing “canon.com/ijsetup” within the address bar.
•Once you reach the printer driver setup page, you've got to click the “Set Up” option. you'll get this feature on the right-hand side of the screen.
•Now, you'll reach the merchandise Selection window. Here, you've got to supply your product model within the required field i.e G3000.
•After that, tap the “Go” button.
•This will redirect you to the driving force downloading screen.
•Further, you've got to settle on the OS as per your preference.

This option is found on the top-right corner of the screen. Tap the inverted triangle and from the menu , you've got to settle on the specified OS.

•After selecting, you'll get the download link. Click the “Download” tab from the center of the screen.
•Consequently, the downloading process of your printer driver will begin.
•During the downloading process, pop-ups of saving the file, choosing the downloading location, etc will appear. so as to finish the downloading process, follow the on-screen instructions.
•Now, wait until your printer driver gets successfully downloaded.
•After the successful completion of the download process, you'll move to its installation.
•Before moving further, make sure that your system is additionally connected with an equivalent wireless network as of printer.
•After that, attend the Downloads folder or the folder where you've got saved your installation setup file.
•Then, to initiate the installation process, you've got to double-click the downloaded setup file.
•Now, a popup box of User Account Control might appear.

This popup box is seeking your permission for creating the specified changes on your device. so as to allow , click the “Yes” tab.

•This will redirect you to the installation wizard.
•In the initial window, if desired then make the specified changes within the language of installation by clicking the “Language” tab from rock bottom of the screen.
•Next, you've got to click the “Start Setup” tab to initiate the setup procedure.
•Thereafter, you've got to pick your country or region. Choose the specified country and just in case you won’t find your country on the list then click the “Other” option.
•Once done, hit the “Next” tab.
•Further, Canon wants you to read the License Agreement document. After reading you'll move further by clicking the “Yes” tab.
•Now, you'll be asked to participate within the Extended Security Programme.

Read the entire information and if desired to participate, then click the “Agree” button. Else, you'll also click the “Do not agree” tab and move further with the method .

•Next, you'll get to ascertain a Firewall Setting window. Tick mark the Deactivate the block checkbox followed by clicking the “Next” button.
•After that, choose the specified printer connection method from “Wireless LAN Connection” and “USB Connection”. Select the well-liked method and tap the “Next” option.
•On choosing the Wireless LAN Connection option, within the next window, you'll be asked to settle on amongst the “Connect Via Wireless Router” and “Direct Connection” option.
•From these, Connect via wireless router option is suggested . But, just in case you select Direct connection, then tap the Instructions options and follow the on-screen steps.

•After selecting, hit the “Next” tab.
•Next, you've got to see the facility . make sure that you've got successfully connected your printer with a wireless connection.
•To move further with the method , tap the “Next” button.
•By doing so, it'll start checking out your printer. This might take a couple of minutes. Hence, await its completion.
•Now, from the list of obtainable printers, select your required one.
•After making the well-liked selection and press the “Next” tab.
•In the Print Head Alignment window, click the “Next” tab.
•This completes the printer setup. Now, for software installation, click the “Next” button.
•Now, a software selection window will appear. you've got to pick the software you would like to put in on your system. Make the choice and click on the “Next” button.
•Further, within the User Registration window, you'll select either “Next” or “Skip” as per your preference.
•After the completion of the method , the Setup completion window will appear. Hit the “Exit” button to return out of the installation wizard.

First Time fixing Canon Pixma G3000 Install

Connecting Printer To The Wireless Network

•First of all, complete the hardware setup of your printer. you furthermore may need to load the paper and ink within the printer.
•Once you're through with the hardware setup of the printer, press the facility button from the operational panel of the printer.
•After that, you've got to press and hold the WiFi button until the lamp light flashes on the printer. you'll find this WiFi button and lamplight on the operational panel.
•Now, press the colour button followed by the WiFi button.
•Make sure lamp light will flash quickly and therefore the power lamp is lit.
•Thereafter, you'll confirm the printer connection to the wireless network.

For connection, a minimum of 2 A-4 papers must be loaded within the paper tray.

•Then, you've got to press and hold the WiFi button until the facility lamp light blinks once.
•Further, again press the WiFi button.
•Subsequently, it'll print the network information page.
•In the network information printout, you've got to see the Connection.

The connection must indicate “Active” along side the right wireless connection name by SSID service.

•This will successfully complete the printer configuration procedure. you'll now proceed to the download and installation of the printer driver.

Download and Install Printer Driver

•Firstly, access an internet browser on your device.
•After that, go the Canon Setup website by typing “canon.com/ijsetup” within the address bar.
•Once you reach the printer driver setup page, you've got to click the “Set Up” option. you'll get this feature on the right-hand side of the screen.
•Now, you'll reach the merchandise Selection window. Here, you've got to supply your product model within the required field i.e G3000.
•After that, tap the “Go” button.
•This will redirect you to the driving force downloading screen.
•Further, you've got to settle on the OS as per your preference.

This option is found on the top-right corner of the screen. Tap the inverted triangle and from the menu , you've got to settle on the specified OS.

•After selecting, you'll get the download link. Click the “Download” tab from the center of the screen.
•Consequently, the downloading process of your printer driver will begin.
•During the downloading process, pop-ups of saving the file, choosing the downloading location, etc will appear. so as to finish the downloading process, follow the on-screen instructions.
•Now, wait until your printer driver gets successfully downloaded.
•After the successful completion of the download process, you'll move to its installation.
•Before moving further, make sure that your system is additionally connected with an equivalent wireless network as of printer.
•After that, attend the Downloads folder or the folder where you've got saved your installation setup file.
•Then, to initiate the installation process, you've got to double-click the downloaded setup file.
•Now, a popup box of User Account Control might appear.

This popup box is seeking your permission for creating the specified changes on your device. so as to allow , click the “Yes” tab.

•This will redirect you to the installation wizard.
•In the initial window, if desired then make the specified changes within the language of installation by clicking the “Language” tab from rock bottom of the screen.
•Next, you've got to click the “Start Setup” tab to initiate the setup procedure.
•Thereafter, you've got to pick your country or region. Choose the specified country and just in case you won’t find your country on the list then click the “Other” option.
•Once done, hit the “Next” tab.
•Further, Canon wants you to read the License Agreement document. After reading you'll move further by clicking the “Yes” tab.
•Now, you'll be asked to participate within the Extended Security Programme.

Read the entire information and if desired to participate, then click the “Agree” button. Else, you'll also click the “Do not agree” tab and move further with the method .

•Next, you'll get to ascertain a Firewall Setting window. Tick mark the Deactivate the block checkbox followed by clicking the “Next” button.
•After that, choose the specified printer connection method from “Wireless LAN Connection” and “USB Connection”. Select the well-liked method and tap the “Next” option.
•On choosing the Wireless LAN Connection option, within the next window, you'll be asked to settle on amongst the “Connect Via Wireless Router” and “Direct Connection” option.
•From these, Connect via wireless router option is suggested . But, just in case you select Direct connection, then tap the Instructions options and follow the on-screen steps.

•After selecting, hit the “Next” tab.
•Next, you've got to see the facility . make sure that you've got successfully connected your printer with a wireless connection.
•To move further with the method , tap the “Next” button.
•By doing so, it'll start checking out your printer. This might take a couple of minutes. Hence, await its completion.
•Now, from the list of obtainable printers, select your required one.
•After making the well-liked selection and press the “Next” tab.
•In the Print Head Alignment window, click the “Next” tab.
•This completes the printer setup. Now, for software installation, click the “Next” button.
•Now, a software selection window will appear. you've got to pick the software you would like to put in on your system. Make the choice and click on the “Next” button.
•Further, within the User Registration window, you'll select either “Next” or “Skip” as per your preference.
•After the completion of the method , the Setup completion window will appear. Hit the “Exit” button to return out of the installation wizard.

pixma-g3000-300x265
ezgif.com-crop
issue
Call Now
Scroll to Top