Canon Pixma G1010 Install

First Time fixing Canon Pixma G1010 Install

1. First of all, you ought to connect the printer to an influence source. Then, turn it On. Before proceeding, make sure that the “Power Lamp” is correctly “lit”. However, just in case if the printer is performing any process like cleaning, print head alignment etc. Then, await an equivalent .
2. Now, activate your network access point i.e. router.
3. Next, connect Canon Pixma G1010 together with your router to configure it. For this, you'll need an coaxial cable . it's usually not included in your Canon Printer package. Else, you'll purchase one from the market. Hence, you want to procure it beforehand.
4. Thereafter locate the Ethernet port on the left side at the rear of your printer. Then, remove the cap on the port.
5. Subsequently, you ought to connect the Printer and therefore the Network Device i.e. Router through the coaxial cable . Here, you want to make sure that the coaxial cable is “plugged in” to the proper port on the printer and router.
6. Now, check out the left-hand side of your printer’s monitor for the “Menu” tab. you'll easily identify it because it is marked with a Home icon. Hence, press the Menu tab.
7. The following screen will have a “Wireless Connection” tab on rock bottom left corner. As such, click thereon to open the Wireless settings screen.
8. The subsequent screen lists various available options. Hence, choose the “LAN Settings” tab.
9. Next, choose the “Wired LAN” option.
10. Now tap on the “Wired LAN Active/ Inactive” button.
11. Thereafter, choose the status as “Active” by clicking the tab.
12, Finally, click on the “Menu” tab located on the left-hand side of the screen. Then, await the configuration to finish . Consequently, you'll find the Ethernet icon on rock bottom left corner of the monitor after the connection is complete.
13. This finishes the primary stage of configuring the printer with the router. Now, you ought to disconnect the printer from the router. Then, proceed for installing the Canon Pixma G1010 drivers on your computer.
14. Now, insert the Installation CD within the computer’s CD drive . Then, click on “Download”.
15. Subsequently, follow on-screen instructions to finish the download. However, within the case of browsers like Internet Explorer 9 or later. it's going to prompt you for saving options. As such, choose the “Save As” option. Then, provide a preferred location to save lots of the downloaded drivers.
16. Then, await the download to end .
17. Thereafter, you ought to “Run” the setup file. For this, open the downloaded SetUp file.
18. Next, click the “Start Setup” button on the Setup Window.
19. The subsequent screen will prompt you to pick your country or region. Hence, select it appropriately. Then, click “Next”.
20. Now, you'll get the “License Agreement”. Hence, scroll it right down to rock bottom . Then, select “Yes”.
21. Consequently, it'll take you to the “Extended Survey Program” window. Here, you'll get two options. As such, you'll either “Agree” or “Disagree” with it. Hence, select appropriately. Another key point to recollect is that just in case you comply with it. Then, Canon will have access to certain information recorded in your printer. In other words, your computer will collect the knowledge and send it to Canon through the web . Canon uses this information for the event and marketing of its products while maintaining the confidentiality of your data.
22. Next screen displays Firewall Settings. Hence, make sure that the choice of “Deactivate the Block” is chosen . Then, click on “Next”.
23. Thereafter, you'll get information regarding your network connection and printer. As such, confirm that the small print are correct. Then, select “Yes” to proceed.
24. As a result, it'll continue with the “Setup”. Now, depending upon your network router, you'll or might not get the “Select wireless router” screen. Here, you ought to select your router. Then, enter its network key i.e. the password. Thereafter, click on “Next” after furnishing the small print .
25. Another thing to recollect that it'll take a while for the Setup. Moreover, it'll disable your network connection temporarily.
26. Next window will confirm that the Network Connection has been completed. As such, click on “Next”.
27. Subsequently, it'll confirm that the Setup has been completed. Besides, it'll offer you the choice to form this printer your default printer. you'll select it and click on on “Next”.
28. Thereafter, few more screens will appear. Here, you've got to easily proceed by clicking “Next” on them.
29. Finally, you'll reach the top of the method . This screen will confirm that the installation has been completed successfully. Now, simply hit the “Exit” button.
30. First of all, you ought to connect the printer to an influence source. Then, turn it On. Before proceeding, make sure that the “Power Lamp” is correctly “lit”. However, just in case if the printer is performing any process like cleaning, print head alignment etc. Then, await an equivalent .
31. Now, activate your network access point i.e. router.
32. Next, connect Canon Pixma G1010 together with your router to configure it. For this, you'll need an coaxial cable . it's usually not included in your Canon Printer package. Else, you'll purchase one from the market. Hence, you want to procure it beforehand.
33. Thereafter locate the Ethernet port on the left side at the rear of your printer. Then, remove the cap on the port.
34. Subsequently, you ought to connect the Printer and therefore the Network Device i.e. Router through the coaxial cable . Here, you want to make sure that the coaxial cable is “plugged in” to the proper port on the printer and router.
35. Now, check out the left-hand side of your printer’s monitor for the “Menu” tab. you'll easily identify it because it is marked with a Home icon. Hence, press the Menu tab.
36. The following screen will have a “Wireless Connection” tab on rock bottom left corner. As such, click thereon to open the Wireless settings screen.
37. The subsequent screen lists various available options. Hence, choose the “LAN Settings” tab.
38. Next, choose the “Wired LAN” option.
39. Now tap on the “Wired LAN Active/ Inactive” button.
40. Thereafter, choose the status as “Active” by clicking the tab.
41. Finally, click on the “Menu” tab located on the left-hand side of the screen. Then, await the configuration to finish . Consequently, you'll find the Ethernet icon on rock bottom left corner of the monitor after the connection is complete.
42. This finishes the primary stage of configuring the printer with the router. Now, you ought to disconnect the printer from the router. Then, proceed for installing the Canon Pixma G1010 drivers on your computer.
43. Now, insert the Installation CD within the computer’s CD drive . Then, click on “Download”.
44. Subsequently, follow on-screen instructions to finish the download. However, within the case of browsers like Internet Explorer 9 or later. it's going to 45. prompt you for saving options. As such, choose the “Save As” option. Then, provide a preferred location to save lots of the downloaded drivers.
46. Then, await the download to end .
47. Thereafter, you ought to “Run” the setup file. For this, open the downloaded SetUp file.
48. Next, click the “Start Setup” button on the Setup Window.
49. The subsequent screen will prompt you to pick your country or region. Hence, select it appropriately. Then, click “Next”.
50. Now, you'll get the “License Agreement”. Hence, scroll it right down to rock bottom . Then, select “Yes”.
51. Consequently, it'll take you to the “Extended Survey Program” window. Here, you'll get two options. As such, you'll either “Agree” or “Disagree” with it. Hence, select appropriately. Another key point to recollect is that just in case you comply with it. Then, Canon will have access to certain information recorded in your printer. In other words, your computer will collect the knowledge and send it to Canon through the web . Canon uses this information for the event and marketing of its products while maintaining the confidentiality of your data.
52. Next screen displays Firewall Settings. Hence, make sure that the choice of “Deactivate the Block” is chosen . Then, click on “Next”.
Thereafter, you'll get information regarding your network connection and printer. As such, confirm that the small print are correct. Then, select “Yes” to proceed.
53. As a result, it'll continue with the “Setup”. Now, depending upon your network router, you'll or might not get the “Select wireless router” screen. Here, you ought to select your router. Then, enter its network key i.e. the password. Thereafter, click on “Next” after furnishing the small print .
54. Another thing to recollect that it'll take a while for the Setup. Moreover, it'll disable your network connection temporarily.
55. Next window will confirm that the Network Connection has been completed. As such, click on “Next”.
56. Subsequently, it'll confirm that the Setup has been completed. Besides, it'll offer you the choice to form this printer your default printer. you'll select it and click on on “Next”.
57. Thereafter, few more screens will appear. Here, you've got to easily proceed by clicking “Next” on them.
58. Finally, you'll reach the top of the method . This screen will confirm that the installation has been completed successfully. Now, simply hit the “Exit” button.

pixma-g1010-300x265
ezgif.com-crop
issue
Call Now

+1(845)-335-8318

Scroll to Top