Canon Maxify MB5170 Install

First Time Setting Up Canon Maxify MB5170 Install

WiFi Configuration and Driver Installation Process

1. First of all, you're required to organize the Canon Maxify MB5170 printer for the setup. Hence, follow the below-given steps for its “Hardware Setup”.
• To begin with, place your Canon Maxify MB5170 printer in a flat and safe place. make sure that it's within the signal range of your network access point i.e. your router.
• Now, carefully unbox your printer. Then remove all the packaging material from within and out of doors of the printer.
• Next, you ought to plug the facility cord into the printer and therefore the other end into a wall outlet.
• Then, press the “ON” button located on the highest to power it up. confirm that its “Power Lamp” is lit and stable.
• Thereafter, unpack the “Printhead” and punctiliously install it in its designated location by adjusting the Paper Tray.
• After that, unpack the “Ink Tank” and properly insert it.
• As a result, it'll lit the “Printhead” and “Ink” Lamps.
• Subsequently, adjust its “Paper Tray” and punctiliously load it with plain A4 size sheets.
• After this, just in case if the printer begins the initialization process. Then, await the method to finish.
2. After completing the physical setup of your printer, proceed with the network configuration. In other words, you'll need to establish a WiFi reference to a network access point or a wireless router. For this, you want to follow the steps given below.
• First of all, make sure that the printer is “Turned On”. you'll check an equivalent by ensuring that its “Power Lamp” is correctly lit and stable.
• Then, check out the “Operational Panel” of the Canon Maxify MB5170 printer. you'll find it at the highest of the printer with a touch-screen display board.
• Here, you ought to search for the “Home” button and press it. However, just in case if a mistake screen is displayed. Then, tap “OK” and press the “Home” button again.
• Now, use the “Arrow” keys to navigate the varied options provided on the “Display Screen”. Then, tap on the “LAN Settings”.
• Next, you ought to tap on the “Wireless LAN Setup” on the subsequent window.
• Thereafter, tap on the “Cableless Setup” to proceed with the Canon Maxify MB5170 printer configuration.
• As a result, a subsequent window will prompt you to “Enable Direct Communication With A Computer or Smartphone etc.” Hence, tap on “OK”.
• The following window will notify that the printer is “Performing Initial Adjustments”. Besides, it'll warn you to not close up the printer’s power. alongside that, it'll suggest you approach your computer/ smartphone, etc., and install drivers.
• Hence, await the method to finish.
• Then, you ought to “Test Print” the printer’s “Network Settings” so as to verify that the printer has been successfully configured. For this, make sure that its “Paper Tray” is correctly loaded with plain A4 sized sheets. Then, press and hold the “Resume/ Cancel” button until the alarm lamp flashes 15 times. Subsequently, release it. As a result, it'll print the “Network Settings Page”. Here, you want to confirm certain details. The “Connection” status should be “Active”. The SSID – Service Set Identifier (the name of your wireless network) should indicate the right name of your wireless network.
• With this, your Canon Maxify MB5170 printer is successfully configured with the web network through the “Cableless Setup” method.
3. Now, install the corresponding software/ drivers to your computer. this may allow your computer to command the printer. For this, you'll either download the drivers from the Canon printer’s setup website. Else, you'll simply use the Installation CD in the following manner.
• To begin with, you ought to properly insert the installation CD within the computer’s CD drive. Most of the days, it'll automatically open the Canon Maxify MB5170 Setup wizard.
• However, if it fails to autorun the “Setup CD-ROM”. Then, eject the CD and reinsert it into the computer’s CD drive. Subsequently, click on “My Computer” from the “Start” menu of your Windows device. Then, select CD-ROM and double-click the “Canon Maxify MB5170 Setup File”. On the opposite hand, Mac users should double-click the “Canon Inkjet” icon from the “Desktop”. Then, click on the “Setup File” from the “Selection Window”.
• Now, you want to install the downloaded drivers to your computer. Since the installation process will depend on your computer’s OS. Therefore, follow the relevant procedure as per your OS.
4. In order to put in the Drivers on Windows, follow the given steps.
• The very first window that you simply will get is that the “User Account Control” window seeking your permission for the installation. Hence, click “Yes” to allow.
• Consequently, it'll open the “Canon Maxify MB5170 Installation Wizard”. Here, you ought to click on “Next”.
• The next window will prompt you to “Select your home Of Residence”. As such, make an appropriate choice and click on “Next”.
• Thereafter, you'll get the “License Agreement” window. Hence, read the small print carefully. Then, click on “Yes” to consent for an equivalent.
• Subsequently, it'll take you to the Extended Survey Program. Here, you'll get two options. You’ll either Agree or afflict it. As such, select appropriately. Here you'll note that just in case if you comply with it. Then, Canon will have access to certain information recorded in your printer. In other words, your computer will collect the knowledge and send it to Canon through the web. Canon uses this information for the event and marketing of its products while maintaining the confidentiality of your data.
• After this, it'll take you to the Firewall Settings window. Hence, make sure that “Deactivate the Block” is chosen. Thereafter, click “Next”.
• The following window will prompt you to verify your “Connection Method”. Hence, select “Use the printer with wireless LAN connection”. Then, click “Next” to proceed with the Canon Maxify MB5170 Setup process. Now, it'll prompt you to show on the printer. Hence, activate the printer if it's off. Here, you want to make sure that the printer’s “Power Lamp” is correctly lit and stable.
• Thereafter, click “OK”.
• Consequently, it'll look for a Canon Maxify MB5170 printer on the network. Once the printer is detected. Then, it'll proceed with the installation process. As such, you ought to follow the on-screen instructions to finish the method.
• However, just in case if it fails to detect the printer. Then, a subsequent window will notify an equivalent. Hence, click “Next” and follow another method to proceed further. Now, just in case if the printer is correctly connected to the network. Still, the pc can’t detect it. Then, check whether the pc is connected to an equivalent network because of the printer or not. just in case if the pc is connected to a special network. Then, disconnect it and connect it back to the network which is shared by the printer. Additionally, you ought to temporarily disable any firewall/ anti-virus on your computer. Then, click on “Redetect”.
• On the contrary, if you had clicked “Next” within the last step thanks to connection issues. Then, the subsequent window will prompt you to attach the printer to the pc through a USB cable. Hence, attach the printer to your computer through a USB cable. Here, you'll click on the “Instructions” tab for an in-depth guide.
• Once the system detects the printer, follow on-screen instructions to finish the installation process.
5. In order to put in the Drivers on Mac, follow the given steps.
• The very first window will prompt you to allow for the installation process. Hence, click “Yes/ Continue” to proceed.
1. First of all, you're required to organize the Canon Maxify MB5170 printer for the setup. Hence, follow the below-given steps for its “Hardware Setup”.
• To begin with, place your Canon Maxify MB5170 printer on a flat and safe place. make sure that it's within the signal range of your network access point i.e. your router.
• Now, carefully unbox your printer. Then remove all the packaging material from the within and out of doors of the printer.
• Next, you ought to plug the facility cord into the printer and therefore the other end into a wall outlet.
• Then, press the “ON” button located on the highest to power it up. confirm that its “Power Lamp” is lit and stable.
• Thereafter, unpack the “Printhead” and punctiliously install it in its designated location by adjusting the Paper Tray.
• After that, unpack the “Ink Tank” and properly insert it.
• As a result, it'll lit the “Printhead” and “Ink” Lamps.
• Subsequently, adjust its “Paper Tray” and punctiliously load it with plain A4 size sheets.
• After this, just in case if the printer begins the initialization process. Then, await the method to finish.
2. After completing the physical setup of your printer, proceed with the network configuration. In other words, you'll need to establish a WiFi reference to a network access point or a wireless router. For this, you want to follow the steps given below.
• First of all, make sure that the printer is “Turned On”. you'll check an equivalent by ensuring that its “Power Lamp” is correctly lit and stable.
• Then, check out the “Operational Panel” of the Canon Maxify MB5170 printer. you'll find it at the highest of the printer with a touch-screen display board.
• Here, you ought to search for the “Home” button and press it. However, just in case if a mistake screen is displayed. Then, tap “OK” and press the “Home” button again.
• Now, use the “Arrow” keys to navigate the varied options provided on the “Display Screen”. Then, tap on the “LAN Settings”.
• Next, you ought to tap on the “Wireless LAN Setup” on the subsequent window.
• Thereafter, tap on the “Cableless Setup” to proceed with the Canon Maxify MB5170 printer configuration.
• As a result, a subsequent window will prompt you to “Enable Direct Communication With A Computer or Smartphone, etc.” Hence, tap on “OK”.
• The following window will notify that the printer is “Performing Initial Adjustments”. Besides, it'll warn you to not close up the printer’s power. alongside that, it'll suggest you approach your computer/ smartphone, etc., and install drivers.
• Hence, await the method to finish.
• Then, you ought to “Test Print” the printer’s “Network Settings” so as to verify that the printer has been successfully configured. For this, make sure that its “Paper Tray” is correctly loaded with plain A4 sized sheets. Then, press and hold the “Resume/ Cancel” button until the alarm lamp flashes 15 times. Subsequently, release it. As a result, it'll print the “Network Settings Page”. Here, you want to confirm certain details. The “Connection” status should be “Active”. The SSID – Service Set Identifier (the name of your wireless network) should indicate the right name of your wireless network.
• With this, your Canon Maxify MB5170 printer is successfully configured with the web network through the “Cableless Setup” method.
3. Now, install the corresponding software/ drivers to your computer. this may allow your computer to command the printer. For this, you'll either download the drivers from the Canon printer’s setup website. Else, you'll simply use the Installation CD in the following manner.
• To begin with, you ought to properly insert the installation CD within the computer’s CD drive. Most of the days, it'll automatically open the Canon Maxify MB5170 Setup wizard.
• However, if it fails to autorun the “Setup CD-ROM”. Then, eject the CD and reinsert it into the computer’s CD drive. Subsequently, click on “My Computer” from the “Start” menu of your Windows device. Then, select CD-ROM and double-click the “Canon Maxify MB5170 Setup File”. On the opposite hand, Mac users should double-click the “Canon Inkjet” icon from the “Desktop”. Then, click on the “Setup File” from the “Selection Window”.
• Now, you want to install the downloaded drivers to your computer. Since the installation process will depend on your computer’s OS. Therefore, follow the relevant procedure as per your OS.
4. In order to put in the Drivers on Windows, follow the given steps.
• The very first window that you simply will get is that the “User Account Control” window seeking your permission for the installation. Hence, click “Yes” to allow.
• Consequently, it'll open the “Canon Maxify MB5170 Installation Wizard”. Here, you ought to click on “Next”.
• The next window will prompt you to “Select your home Of Residence”. As such, make an appropriate choice and click on “Next”.
• Thereafter, you'll get the “License Agreement” window. Hence, read the small print carefully. Then, click on “Yes” to consent for an equivalent.
• Subsequently, it'll take you to the Extended Survey Program. Here, you'll get two options. You’ll either Agree or afflict it. As such, select appropriately. Here you'll note that just in case if you comply with it. Then, Canon will have access to certain information recorded in your printer. In other words, your computer will collect the knowledge and send it to Canon through the web. Canon uses this information for the event and marketing of its products while maintaining the confidentiality of your data.
• After this, it'll take you to the Firewall Settings window. Hence, make sure that “Deactivate the Block” is chosen. Thereafter, click “Next”.
• The following window will prompt you to verify your “Connection Method”. Hence, select “Use the printer with wireless LAN connection”. Then, click “Next” to proceed with the Canon Maxify MB5170 Setup process. Now, it'll prompt you to show it on the printer. Hence, activate the printer if it's off. Here, you want to make sure that the printer’s “Power Lamp” is correctly lit and stable.
• Thereafter, click “OK”.
• Consequently, it'll look for a Canon Maxify MB5170 printer on the network. Once the printer is detected. Then, it'll proceed with the installation process. As such, you ought to follow the on-screen instructions to finish the method.
• However, just in case if it fails to detect the printer. Then, a subsequent window will notify an equivalent. Hence, click “Next” and follow another method to proceed further. Now, just in case if the printer is correctly connected to the network. Still, the pc can’t detect it. Then, check whether the pc is connected to an equivalent network because of the printer or not. just in case if the pc is connected to a special network. Then, disconnect it and connect it back to the network which is shared by the printer. Additionally, you ought to temporarily disable any firewall/ anti-virus on your computer. Then, click on “Redetect”.
• On the contrary, if you had clicked “Next” within the last step thanks to connection issues. Then, the subsequent window will prompt you to attach the printer to the pc through a USB cable. Hence, attach the printer to your computer through a USB cable. Here, you'll click on the “Instructions” tab for an in-depth guide.
• Once the system detects the printer, follow on-screen instructions to finish the installation process.
5. In order to put in the Drivers on Mac, follow the given steps.
• The very first window will prompt you to allow for the installation process. Hence, click “Yes/ Continue” to proceed.
• This will open the “Installation Wizard”. Now, click “Continue” on this first window.
• Now, you'll get the “Software License Agreement” window. Hence, review the document carefully. you'll even read it in your preferred language. For this, you ought to click on the “Language” drop-down box. Then, select the language of your choice. After reading the document, click on “Continue” to proceed further. alongside that, you'll reserve it for future reference. Hence, click on the “Save” button before proceeding further.
• Consequently, you'll get a pop-up box seeking your consent for the “Software License Agreement”. Hence, click on “Agree”.
• Finally, you'll get the “Installation” window. Here, it'll display the disc space required for saving the Drivers. Hence, make sure that your Mac has sufficient free disc space. Then, click on “Install”.
• Thereafter, it'll prompt you to supply your Mac login credentials. Hence, enter your “mac Administrator User ID and Password” correctly.
• Subsequently, click on “Install Software” to proceed with Canon Maxify MB5170 Setup.
• Now, await the installation to finish properly. Then, click on “Exit” to shut the Installer.
At last, restart your computer to conclude the Canon Maxify MB5170 setup.
• This will open the “Installation Wizard”. Now, click “Continue” on this first window.
• Now, you'll get the “Software License Agreement” window. Hence, review the document carefully. you'll even read it in your preferred language. For this, you ought to click on the “Language” drop-down box. Then, select the language of your choice. After reading the document, click on “Continue” to proceed further. alongside that, you'll reserve it for future reference. Hence, click on the “Save” button before proceeding further.
• Consequently, you'll get a pop-up box seeking your consent for the “Software License Agreement”. Hence, click on “Agree”.
• Finally, you'll get the “Installation” window. Here, it'll display the disc space required for saving the Drivers. Hence, make sure that your Mac has sufficient free disc space. Then, click on “Install”.
• Thereafter, it'll prompt you to supply your Mac login credentials. Hence, enter your “mac Administrator User ID and Password” correctly.
• Subsequently, click on “Install Software” to proceed with Canon Maxify MB5170 Setup.
• Now, await the installation to finish properly. Then, click on “Exit” to shut the Installer.
At last, restart your computer to conclude the Canon Maxify MB5170 setup.

mb5170-300x265
ezgif.com-crop
issue
Call Now
Scroll to Top