Canon imageClass MF429x Install

First Time Setting Up Canon imageClass MF429x Install

Hardware Setup

• First of all, prepare the Canon imageCLASS MF429x printer for the setup. Hence, follow the below-given steps for its “Hardware Setup”.
• To begin with, place your Canon imageCLASS MF429x printer in a flat and safe place. make sure that it's within the signal range of your network access point i.e. your router.
• Now, carefully unbox your printer. Then remove all the packaging material from within and out of doors of the printer.
• Next, you ought to plug the facility cord into the printer and therefore the other end into a wall outlet.
• Then, press the “ON” button located on the highest to power it up. confirm that its “Power Lamp” is lit and stable.
• Subsequently, adjust its “Paper Tray” and punctiliously load it with plain A4 size sheets.
• After this, just in case if the printer begins the initialization process. Then, await the method to finish.

Establishing Connection between the Printer and Network

• First and foremost, make sure that Canon imageCLASS MF429x is securely plugged into a stable “Power Source” and turned “ON”. For this, check its “Power Lamp”. It must be properly lit and stable.
• Along with that, make sure that the “Network Access Point” or “Router” is turned “ON” and available for connection.
• Now, check out the printer’s “Operational Panel”. you'll find it at the highest of the printer. Here, you ought to check out its “Display Screen”. It should be lit and present its “Main Menu”. However, if it doesn’t provide the “Main Menu”. Then, search for the “Energy Saver” button. In other words, you ought to search for a button with a “Sleep Mode” icon. Now, if this button is lit. Then, press it to “Wake” the printer. Thereafter, press the “Home” button to open its “Home” window.
• Next, you ought to use the “Arrow Keys” to navigate the “Display Panel”. As such, search for the “Menu” tab. Then, tap thereon to open the “Menu” window.
• Now, tap on the “Preferences” tab to pick it. Then, press “OK” from the “Operational Panel”.
• This will expand the “Preferences” section and supply another list of options. Now, select “Network” by tapping it.
• As a result, it's going to prompt you to “log in”. Hence, enter your printer’s “Manager Login ID and Password”. Then, tap “OK”.
• Thereafter, select “Wireless LAN Settings”.
• After that, if you get the “Do you would like to enable the wireless LAN?” message. Then, tap on “Yes”.
• Subsequently, read the message provided in the subsequent window. Then, select “OK”.
• Now, select “WPS push Mode”.
• When prompted, select “Yes”. this may enable the printer’s “WPS Mode”.
• Thereafter, you're required to act fast and approach your router.
• Next, you ought to locate the router’s “WPS” push-button. Then, “Press and Hold” it. Here, you want to remember that you simply should press the router’s “WPS” button within the stipulated time. In other words, it should be pressed within two minutes of tapping “Yes” on your printer.
• Consequently, you'll notice that your printer’s pilot light blinks continuously. this means that the printer is trying to locate an available network within range.
• Simultaneously, the “Power Lamp” will start blinking. Hence, wait till both the lamps stop blinking, but remains lit up. During this process, the printer locates and connects to the network.
• Thereafter, it connects your Canon imageCLASS MF429x Printer securely to your home network.
• As such, your printer will display a message stating the status as “Connected”.
• Now, wait a few more minutes because it will automatically set the IP Address and other settings.
• This concludes the network configurations for Canon imageCLASS MF429x. Now, proceed to put in the Drivers.

Download/ Install Canon imageCLASS MF429x Drivers

• First of all, activate your Canon imageCLASS MF429x printer, Computer, and Router. Besides that, you want to make sure that the router is functioning properly. additionally thereto, make sure that it's an equivalent router with which you've got connected your printer.
• Besides that, confirm that both the printer and therefore the computer is properly connected to an equivalent network.
• Now, properly insert the “Installation CD” into your system’s “CD Drive”.
• Consequently, the Canon imageCLASS MF429x Setup wizard will automatically open up.
• However, just in case if the “Setup CD-ROM” fails to run automatically. Then, eject the CD. Now, insert it once more into the computer’s CD drive. Subsequently, if you've got a Windows device. Then, click on “My Computer” from the “Start” menu. Thereafter, select CD-ROM and double-click the “Canon imageCLASS MF429x Setup File”. On the opposite hand, Mac users should double-click the “Canon Laser” icon from the “Desktop”. Then, click on the “Setup File” from the “Selection Window”.
• The initial window of the Setup Wizard provides an inventory of “Installation Options”. As such, click on “Easy Installation” for effortless installation of the Drivers.
• Now, it'll take you to the “Select the sort Of Connection” window. Here, you ought to search for “Connect Printer To the pc via Network”. Underneath it, you'll find the “Next” button. Hence, click thereon.
• As a result, a subsequent window will display the small print of the drivers/ software. As such, click “Install” to proceed.
• Subsequently, it'll take you to the “License Agreement” window. Here, you ought to closely read the terms and click on “Yes”.
• Consequently, it'll open the “Canon imageCLASS MF429x Setup Wizard”. Here, you ought to click on “Next”.
• Then, click “Yes” when prompted to allow for “Firewall Settings”.
• Thereafter, it'll prompt you to “Select Device”. This window will provide you with an inventory of devices available on the network for installing the Drivers. Hence, select your “Device” from the list. Then, click “Next”.
• However, just in case if it doesn’t display the name of your device within the list. Then,
• Check the subsequent.
• The computer and machine are connected over the network.
• The machine is turned ON.
• The IP address is about correctly
• The computer and machine are on an equivalent subnet
• Security software is disabled
• Click on “Update Device List” located below the list of “Devices”.
• This should resolve the difficulty. However, just in case if still it doesn’t display your “Device Name”. Then, you ought to follow this alternative. Another key point to recollect is that you simply must have the “IP Address” of your system.
• Click on “Search By IP Address”. you'll find it beneath the list of “Devices”.
• Then, accurately type in your system’s “IP Address” within the following pop-up box.
• Thereafter, click “OK”.
• Consequently, a subsequent window will display some “Settings Details”. Hence, click on “Start” to start the installation process.
• The next window will keep you updated with the Installation Status” through a progress bar.
• Finally, it'll notice that the “Installation is Complete”. Hence, click on “Exit”.
• After that, it'll prompt you to start out the installation for the Driver’s “Toolbox”. Hence, click on “Start”.
• Then, click “Exit” once the installation is complete.

Call Now


Scroll to Top