Canon imageClass LBP215x Install

First Time Setting Up Canon imageClass LBP215x Install

Hardware Setup


• First and foremost, you ought to prepare your Canon imageCLASS LBP215x printer for the setup procedure. For this, you ought to undertake the subsequent “Hardware Setup”.
• In the very first place, you ought to place your Canon imageCLASS LBP215x printer in a flat and safe location. alongside that, confirm it's within the signal range of your network access point i.e. your router.
• After that, you'll need to carefully unbox your printer. Then, remove all the packaging material from within and out of doors of the printer.
• Now, you ought to hook it up with an influence source. For this, connect one end of the facility Cable into the printer and therefore the other end into a wall outlet. Then, switch it on.
• Thereafter, press the “ON” button located on the highest to power it up. As a result, its “Power Lamp” should lit up. Here, you want to make sure that the “Power Lamp” should be stable.
• Subsequently, setup its “Paper Tray” and punctiliously insert a bundle of plain A4 size sheets.
• Once the hardware is prepared, your printer may automatically begin the initialization process. this might make some noise also. Hence, don't worry and await the method to finish.
• Consequently, its display board will begin the Setup Guide. The on-screen prompts will guide you thru the initial setup procedures. Hence, follow the guide and make the required selections. Here, you'll need to set “Display Language”, “Country/ Region”, “Date”, “Time”, and “Access Security Measures (PIN)”.
• Finally, select “End” to go away from the Setup Guide. As a result, it'll take you to the “Home” screen.

Establishing Connection between the Printer and Network

• First and foremost, securely connect your Canon imageCLASS LBP215x into a stable “Power Source” and switch it “ON”. For this, press the “Power” button located on its front side. Now, check its “Power Lamp”. It must be properly lit and stable.
• Along with that, activate the “Network Access Point” or “Router”. Besides, confirm it's available for connection.
• Now, access the printer’s “Operational Panel”. In other words, you ought to check out the highest of the printer. Here, you'll find its “Display Screen” which should be lit. This window should display its “Main Menu” i.e. the “Home” screen. However, if it doesn’t show the “Main Menu”. Then, check the “Energy Saver” button. In other words, search for a button with a “Sleep Mode” icon. Now, if this button is lit. Then, press it to “Wake” the printer. Thereafter, press the “Home” button to open its “Home” window.
• Next, you ought to scroll left or right to navigate the “Display Panel”. As such, search for the “Menu” tab. Then, tap thereon to open the “Menu” window.
• Thereafter, tap on the “Preferences” tab to pick it.
• This will expand the “Preferences” section and supply another list of options. Now, select “Network” by tapping it.
• Consequently, you'll be prompted to “log in”. Hence, enter your printer’s “System Manager Login ID and PIN/ Password”. Then, tap “Login”.
• Subsequently, tap on “Wireless LAN Settings” to pick it.
• Then, tap “Yes”. this may enable the wireless LAN option.
• Now, read the displayed message. Then, tap “OK”.
• The following window various options for wireless connection. Hence, tap on “SSID Settings” to pick it. Here, SSID refers to the name of your wireless network.
• After this, you ought to tap on “Select Access Point”. this is often the foremost convenient method because the printer will automatically locate and hook up with the network.
• As a result, Canon imageCLASS LBP215x will start checking out the networks available for connection. Thereafter, it'll display an inventory of all the available networks (routers).
• Hence, select the specified “WiFi Network”. Then, tap “Next”. Here, you want to make sure that you've got selected an equivalent Network which is connected to your “Computer”.
• Next, you ought to tap “OK” when prompted to verify your choice.
• Thereafter, enter your “Network Password”. Hence, be very careful while entering an equivalent. you'll use the “Up” arrow key of the touchscreen keypad to modify between “Upper” and “Lowercase”. alongside that, use the “Symbol” key for “Numbers” and “Symbols”.
• After that, tap on “Apply”.
• Now, read the displayed message. Then, tap “Yes”.
• As a result, it'll establish a connection between the printer and therefore the network. this may take time.
• Hence, wait until you get the “Connected” message on your screen. Then, tap “Close”.
• Thereafter, you'll need to wait a couple of more minutes because it will automatically set the IP address and other details.
• This concludes the network configurations for Canon imageCLASS LBP215x. Now, proceed to put in the Drivers.

Download/ Install Canon imageCLASS LBP215x Drivers

• To begin with, activate your Canon imageCLASS LBP215x Printer, Computer, and Router. additionally thereto, make sure that the router is functioning properly. Moreover, confirm that it's an equivalent router with which you've got connected your printer.
• Along with that, make sure that both the printer and therefore the computer is properly connected to an equivalent network.
• Then, insert the “Installation CD” into your system’s “CD Drive”. you always get this “Installation CD” in your printer package. Alternatively, you'll download the drivers from the official website of Canon.
• As a result, it'll automatically open the Canon imageCLASS LBP215x Setup wizard.
• Nevertheless, if it fails automatically run the “Setup CD-ROM”. Then, eject the CD and reinsert it into the computer’s CD drive.
• Subsequently, if you've got a Windows device. Then, click on “My Computer” from the “Start” menu. Thereafter, select CD-ROM and double-click the “Canon imageCLASS LBP215x Setup File”. On the opposite hand, Mac users should double-click the “Canon Laser” icon from the “Desktop”. Then, click on the “Setup File” from the “Selection Window”.
• As such, you get the initial window of the Setup Wizard. Here, you'll get an inventory of “Installation Options”. Hence, click on “Easy Installation” if you're trying to find an easy installation.
• Now, you'll get the “Select the sort Of Connection” window. As such, search for the “Connect Printer To the pc via Network” section. you'll find a “Next” button beneath it. Hence, click thereon.
• The following window will showcase the small print of the drivers/ software. Hence, click on “Install” to proceed.
• Thereafter, you'll get the “License Agreement” window. Now, closely review the terms by scrolling right down to the very bottom. Then, click on “Yes”.
• As a result, it'll open the “Canon imageCLASS LBP215x Setup Wizard”. Here, you ought to click “Next”.
• Thereafter, it'll seek your permission for “Firewall Settings”. Hence, click “Yes” when prompted.
• After that, it'll prompt you to “Select Device”. you'll get an inventory of devices available on the network for installing the Drivers. As such, select your “Device” i.e. your Printer from the list. Thereafter, click “Next”.
• Nonetheless, if you don’t get the name of your device (printer) during this list. Then, undergo the subsequent options.
Check the subsequent.
• The computer and machine are connected over the network.
• The machine is turned ON.
• The IP address is about correctly
• The computer and machine are on an equivalent subnet
• Security software is disabled
• Click on “Update Device List” located below the list of “Devices”.
• This should resolve the difficulty. However, just in case if still it doesn’t display your “Device Name”. Then, you ought to follow this alternative. Another key point to recollect is that you simply must have the “IP Address” of your system.
• Click on “Search By IP Address”. you'll find it beneath the list of “Devices”.
• Then, accurately type in your system’s “IP Address” within the following pop-up box.
• Thereafter, click “OK”.
• Now, you'll get some “Settings Details” on the subsequent window. Finally, click on “Start” to initiate the installation process.
• The following window will keep you posted about the “Installation Status” through a progress bar.
• Once the method completes successfully, it'll display “Installation is Complete”. Hence, click on “Exit”.
• Next, it'll ask you to start the installation for the Driver’s “Toolbox”. Hence, click on “Start”.
• Finally, after the installation is complete, click "Exit".
• Then, restart your “Computer”.

lbp215x
ezgif.com-crop
Call Now
issue
Scroll to Top